[No Signal Shut-Off]; [Function Button]; [Date And Time]; [Save All User Data] - Panasonic PT-DW730ULS Operating Instructions Manual

[NO SIGNAL SHUT-OFF]

You can set the power of the projector automatically
to standby if there is no input signal by the specified
time.
1) Press ▲▼ to select [NO SIGNAL SHUT-
OFF].
2) Press ◀▶ to switch [NO SIGNAL
SHUT-OFF].
Disables [NO SIGNAL SHUT-
[DISABLE]
OFF].
[10MIN.] - Allows you to set in ten minute
[90MIN.] intervals.

[FUNCTION BUTTON]

You can set the <FUNCTION> button on the remote
control.
1) Press ▲▼ to select [FUNCTION
BUTTON].
2) Press the <ENTER> button.
3) Press ▲▼ to select the function.
[DISABLE] Disables the <FUNCTION> button.
Switches the sub memory.
[SUB MEMORY]
( page 69)

[SYSTEM Switches the setting for [SYSTEM
SELECTOR] SELECTOR]. (
[SYSTEM
Switches the setting for [SYSTEM
DAYLIGHT
DAYLIGHT VIEW]. (
VIEW]
Freezes the image temporarily.
[FREEZE]
( page 60)

Switches to two window display.
[SIDE BY SIDE]
*1
( page 60)

*1: Only for PT-DW730U
4) Press the <ENTER> button.

[DATE AND TIME]

You can set the time zone, date, and time of the built-
in clock of the projector.
1) Press ▲▼ to select [DATE AND TIME].
2) Press the <ENTER> button.
3) Press ▲▼ to select [TIME ZONE].
4) Press ◀▶ to switch [TIME ZONE].
5) Press ▲▼ to select [ADJUST CLOCK].
6) Press the <ENTER> button.
z The [ADJUST CLOCK] screen is displayed.
page 47)

page 46)

[PROJECTOR SETUP] menu
7) Press ▲▼ to select the item to be set,
and press ◀▶ to set the local date
and time.
8) Press ▲▼ to select [APPLY], and
press the <ENTER> button.
z The setting of the time will be completed.

[SAVE ALL USER DATA]

You can save the various setting values as a backup
in the built-in memory of the projector.
1) Press ▲▼ to select [SAVE ALL USER
DATA].
2) Press the <ENTER> button.
z The [SECURITY PASSWORD] screen is
displayed.
3) Enter the security password and press
the <ENTER> button.
4) When the confirmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
z While data is saved, [PROGRESS] is displayed.
Note
z The setting of the image registered in [USER
LOGO] will not be saved.
ENGLISH - 65