[Back Color] - Panasonic PT-DW730ULS Operating Instructions Manual

■ [OSD DESIGN]
You can set the color of the menu screen (OSD).
z The setting will change as follows each time
you press the button.
[1]: Yellow
[6]: Brown
[5]: Pink
■ [OSD MEMORY]
You can be set whether to maintain the cursor
position of the menu screen (OSD).
z The setting will change as follows each time
you press the button.
[ON]
Note
z The cursor position will not be maintained when the
<MAIN POWER> switch of the projector body is set
to <OFF>, even if it is set to [ON].
■ [INPUT GUIDE]
You can set to display the input terminal name
currently selected in the position set by the [OSD
POSITION].
z The setting will change as follows each time
you press the button.
[ON]
■ [WARNING MESSAGE]
You can set the display/hide of the warning
message.
z The setting will change as follows each time
you press the button.
[ON]
You can set the color of the projected image when
there is no signal input.
1) Press ▲▼ to select [BACK COLOR].
[2]: Blue
2) Press ◀▶ to switch [BACK COLOR].
[3]: White
[4]: Green
[OFF]
[OFF]
[OFF]
[DISPLAY OPTION] menu

[BACK COLOR]

z The setting will change as follows each time
you press the button
[BLUE]
[DEFAULT LOGO]
The entire projection area appears
[BLUE]
blue.
The entire projection area appears
[BLACK]
black.
The picture registered by the user
[USER LOGO]
is projected.
[DEFAULT
The Panasonic logo is projected.
LOGO]
Note
z Separate software Logo Transfer Software is
required to create and register the pictures of [USER
LOGO]. Refer to the application software download
from the website support information (http://
panasonic.net/avc/projector/software/).
[BLACK]
[USER LOGO]
ENGLISH - 59