Table of Contents
Advertisement
SDI SIGNAL LEVEL
Select the amplitude for the signals to be input.
This is only valid when YP
HD-SDI. The setting will change as follows each
time the button is pressed.
64-940
•
64-940:
Normally set this.
•
4-1019:
Set this when gray appears black.
On-Screen display setting
The user can specify the on-screen display.
Press ▲▼ to select
1.
"ON-SCREEN DISPLAY".
AUX SDI IN
ON-SCREEN DISPLAY
BACK COLOR
2.
Press ENTER.
•
The "ON-SCREEN DISPLAY" screen will be
displayed.
ON-SCREEN DISPLAY
OSD POSITION
OSD DESIGN
Press ▲▼ to select the desired
3.
item, and press ◄► to change
the setting.
OSD POSITION
This sets the position of the on-screen display
(OSD).
1 (Top left of the
screen)
9 (Bottom right of
the screen)
8 (Right centre of
the screen)
7 (Top right of the
screen)
P
and RGB input of
B
R
4-1019
BLACK
2
1
2 (Left centre of the
screen)
3 (Bottom left of the
screen)
4 (Top centre of the
screen)
5 (Centre of the
screen)
6 (Bottom centre of
the screen)
OSD DESIGN
This sets the colour of the on-screen display
(OSD).
1
6
5
• :
1
Displayed in yellow.
•
2:
Displayed in blue.
•
3:
Displayed in white.
•
4:
Displayed in green.
•
5:
Displayed in pink.
•
6:
Displayed in brown.
OSD MEMORY
This lets you save the cursor position in on-screen
menus.
OFF
INPUT GUIDE
This sets whether to display the currently selected
input terminal name at the position set for "OSD
POSITION".
OFF
WARNING MESSAGE
This sets the display of warning messages.
OFF
Back Colour
This sets the colour for the projection screen when no
signals are being input.
Press ▲▼ to select "BACK
1.
COLOR".
ON-SCREEN DISPLAY
BACK COLOR
STARTUP LOGO
2
3
4
ON
ON
ON
BLACK
LOGO3
ENGLISH – 75
Advertisement
Chapters
Table of Contents
