OPTION Menu
INPUT GUIDE
When you press INPUT or the INPUT SELECT button
to change the input method, the guidance is indicated in
the upper right corner of the screen. The following
display methods are available. Press I H to cycle
through the options.
Options
OFF
SIMPLE
DETAILED
OSD DESIGN
You can change the background colour of the menu.
Press I H to cycle through the options.
Options
TYPE1
TYPE2
TYPE3
34 - E
NGLISH
See "Navigating through
the MENU" on page 26.
Function
Turn off the guidance.
Display the input method by text.
The INPUT GUIDE will go out
after 5 seconds without any
operation.
Display the input method by
graphic.
The INPUT GUIDE will go out
after 10 seconds without any
operation.
Function
Semi transparent black
Solid blue
Semi transparent dark blue
OSD POSITION
You can change the position where to display the menu.
Press I H to cycle through the options.
UPPER
UPPER
LEFT
CENTRE
CENTRE
LOWER
LOWER
LEFT
CENTRE
BACK COLOUR
You can choose a BLUE or BLACK screen for when the
projector is idle. Press I H to select an option.
STARTUP LOGO
You can switch on/off the logo that is displayed when
starting up. Press I H to select an option.
• ON:
Active
• OFF:
Deactive
AUTO SEARCH
When the projector is turned on, the input terminals are
detected and an input signal is selected automatically.
You can switch on/off the system. Press I H to select
an option.
• ON:
Active
• OFF:
Deactive
NOTE:
When no signal is detected, the last used input
method will be selected.
HDMI SIGNAL LEVEL
You can switch the HDMI signal level NORMAL or
EXPAND when an HDMI (RGB) signal selected. Press
I H to select an option.
UPPER
RIGHT
LOWER
RIGHT