Supported Commands; Using The Pjlink™ Protocol - Panasonic DLP PT-D12000E Operating Instructions Manual

Using the PJLink™ protocol
The network function of the projector supports PJLink™ class 1, and the PJLink™ protocol can be used to
perform projector setting and projector status query operations from a PC.

Supported commands

The following table lists the PJLink™ protocol commands that can be used to control the projector.
Command Control details
POWR Power supply control
POWR ? Power supply status query
INPT Input selection
INPT ? Input selection query
AVMT Shutter control
AVMT ? Shutter mode query
ERST? Error status query
LAMP ? Lamp status query
INST ? Input selection list query
NAME ? Projector name query
INF1 ? Manufacturer name query
INF2 ? Model name query
INFO ? Other information query
CLSS ? Class information query
PJLink™ security authorization
When using PJLink™ with security authorization, either of the password set for administrator privileges and
the password set for user privileges with Web browser control can be used as the password for PJLink™.
When using PJLink™ without security authorization, set use without the password for administrator privileges
and the password for user privileges of Web browser control.
• PJLink™ is a pending trademark in Japan, the United States, and other countries and regions.
For specifications regarding PJLink™, refer to the Japan Business Machine and Information System
Industries Association website.
URL: http://pjlink.jbmia.or.jp/
Parameters
0 = Standby
1 = Power ON
Parameters
0 = Standby
2 = Cool-down in progress
Parameters
11 = RGB1 12 =RGB2
21 = VIDEO 22 = S-VIDEO
31 = DVI-D
32 = AUX (only enabled if ET-MD77DV, ET-MD77SD1, ET-MD77SD3 or
ET-MD100SD4 is installed)
Parameters
30 = Shutter mode off (picture mute cancelled)
31 = Shutter mode on (picture mute)
Parameters
1st byte: Indicates fan errors, range 0--2
2nd byte: Indicates lamp errors, range 0--2
3rd byte: Indicates temperature errors, range 0--2
4th byte: Indicates cover open errors, range 0--2
5th byte: Indicates filter errors, range 0--2
6th byte: Indicates other errors, range 0--2
Definitions for each value from 0 to 2 are as follows.
0 = No error known 1 = Warning
Parameters
1st digits (1--5 digits): Lamp 1 cumulative operating time
2nd digit: 0 = Lamp 1 off, 1 = Lamp 1 on
3rd digits (1--5 digits): Lamp 2 cumulative operating time
4th digit: 0 = Lamp 2 off, 1 = Lamp 2 on
5th digits (1--5 digits): Lamp 3 cumulative operating time
6th digit: 0 = Lamp 3 off, 1 = Lamp 1 on
7th digits (1--5 digits): Lamp 4 cumulative operating time
8th digit: 0 = Lamp 4 off, 1 = Lamp 2 on
The following are returned as parameters.
"11 12 21 22 31" (If any of the ET-MD77DV, ET-MD77SD1, ET-MD77SD3 or
ET-MD100SD4 are installed, "11 12 21 22 31 32" is returned.)
The name set for "HOST NAME" in "NETWORK" is returned.
"Panasonic" is returned.
"D12000" or "DZ12000" is returned.
Information such as version number is returned.
"1" is returned.
Notes
1 = Power ON
3 = Warm-up in progress
2 = Error
ENGLISH – 105