Panasonic DLP PT-D12000E Operating Instructions Manual page 63

• OFF:
Geometry correction is not performed.
• KEYSTONE:
This adjusts projected images when they are
distorted to a trapezoid.
• CURVED:
This adjusts projected images when they are
distorted to a curved surface.
• PC:
This is for performing geometry correction from a PC.
3. Select "KEYSTONE" or
"CURVED" in Step 2, and then
press ENTER.
• The "GEOMETRY:KEYSTONE" or
"GEOMETRY:CURVED" screen will be
displayed.
GEOMETRY:KEYSTONE
VERTICAL KEYSTONE
VERTICAL SUB KEYSTONE
GEOMETRY:CURVED
LENS THROW RATIO
VERTICAL KEYSTONE
Press ▲▼ to select the desired
4.
adjustment item, and press ◄►
to adjust the correction amount.
• You can adjust the projection images as shown
below.
KEYSTONE menu:
• VERTICAL KEYSTONE
• VERTICAL SUB KEYSTONE
• HORIZONTAL KEYSTONE
• HORIZONTAL SUB KEYSTONE
•
CURVED menu:
•
•
•
0
0
0
0
•
•
•
•
Note
• If vertical keystone correction is set, menus and
logos may protrude out of the screen.
• If both edge blending adjustment and geometry
correction are used, set the geometry correction
to curved-surface correction or PC. If geometry
correction is set to keystone-distortion correction,
edge blending adjustment cannot be made
correctly. (p. 66)
LINEARITY
LENS THROW RATIO
Set the throw ratio of the lens you are using.
(pp. 22-24)
VERTICAL KEYSTONE
HORIZONTAL KEYSTONE
VERTICAL ARC
HORIZONTAL ARC
VERTICAL BALANCE
HORIZONTAL BALANCE
ENGLISH – 63