Option Menu; Input Guide; Osd Design; Osd Position - Panasonic PT-AE1000E Operating Instructions Manual

OPTION Menu

INPUT GUIDE

When you press INPUT or the INPUT SELECT button
to change the input method, the guidance appears in the
upper right corner of the screen. The following display
methods are available. Press I H to cycle through the
options.
Options
OFF
SIMPLE
DETAILED

OSD DESIGN

You can change the background colour of the menu.
Press I H to cycle through the options.
Options

TYPE1

TYPE2
TYPE3
38 - E
NGLISH
See "Navigating through
the MENU" on page 28.
Function
Turn off the guidance.
Display the input method by text.
The INPUT GUIDE will go out after
5 seconds without any operation.
Display the input method by
graphic.
The INPUT GUIDE will go out after
10 seconds without any operation.
Function
Semi transparent black
Solid blue
Semi transparent dark blue

OSD POSITION

You can change the position where to display the menu.
Press I H to cycle through the options.
UPPER UPPER
LEFT CENTRE
CENTRE
LOWER LOWER
LEFT CENTRE

BACK COLOUR

You can choose a BLUE or BLACK screen for when the
projector is idle. Press I H to select an option.

STARTUP LOGO

You can switch the logo on/off that is displayed when
starting up the projector. Press I H to select an option.
• ON: Active
• OFF: Deactive

AUTO SEARCH

When the projector is turned on, the input terminals are
detected and an input signal is selected automatically.
You can switch the system on/off. Press I H to select
an option.
• ON: Active
• OFF: Deactive
NOTE:
When no signal is detected, the last used input
will be selected.

HDMI SIGNAL LEVEL

When an HDMI is selected, you can switch the HDMI
signal level NORMAL or EXPAND to display the image.
Press I H to select an option.
NOTE:
HDMI SIGNAL LEVEL is not available with some
equipments.
UPPER
RIGHT
LOWER
RIGHT