Related Manuals for OneTech NT09EC-405
Summary of Contents for OneTech NT09EC-405
- Page 1 NT09E-303 v.1.0 EN CORDLESS RANDOM ORBITAL SPOT SANDER NT09EC-405 OPERATION MANUAL...
-
Page 2: Important Safety Instructions
NT09EC-405 v.1.1 EN ATTENTION! PLEASE READ THIS MANUAL BEFORE OPERATING THE TOOL. INAPPROPRIATE USE OF THE TOOL MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! ONLY QUALIFIED AND SPECIALLY TRAINED PERSONNEL FAMILIARIZED WITH THESE INSTRUCTIONS IS ALLOWED TO OPERATE AND PERFORM MAINTENANCE OF THE TOOL. - Page 3 NT09EC-405 v.1.1 EN POWER TOOL USE AND CARE • Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
-
Page 4: Additional Safety Warnings
• Read all instructions before using this tool. All operators must be fully trained in the proper, safe use of this tool. • All maintenance must be carried out by trained personnel. For service, contact a ONETECH authorized service centre. -
Page 5: Product Description
ONETECH cannot be held responsible for the consequences of using declared values instead of actual exposure values for any individual risk assessment. - Page 6 NT09EC-405 v.1.1 EN 5. PROPER USE OF THE TOOL This sander is designed for sanding all types of materials such as paints, metals, wood, stone, plastics, etc., using abrasives specially designed for this purpose. Do not use this sander for any other purpose than that specified without consulting the manufacturer or the manufacturer’s ...
-
Page 7: Replacing The Backing Plate
A charger that is suitable for one type of battery pack may create a risk of fire when used with another type of battery pack. Battery packs can only be charged using ONETECH chargers: – NT09E-103 Rapid Charger (input 100-240 VAC, output 18 VDC, 3 A) –... -
Page 8: Charging Procedure
– the damage was caused by failure to use original ONETECH parts; – the user disassembled the tool on their own, or damage to the tool was caused in the process of repair, rebuilding, disassembly or maintenance at non-ONETECH authorized service points;... -
Page 9: Exemption From Liability
ONETECH reserves the right to modify the above terms and conditions at any time without notice, and is entitled to the final interpretation of the above warranty terms. - Page 10 NT09EC-405 v.1.1 EN Parts Description Part No. Q'ty Description Part No. Q'ty Screw M3x6 NT09S-1383 Location Key NT09S-1397 Backing Plate Support NT09S-1384 Spring 0.4x6x15 NT09S-1398 Swing Seat NT09S-1385 Brand Label NT09S-1399 Retaining Ring NT09S-1386 Housing (Left) NT09S-1400 Screw M4x6 NT09S-1387...
- Page 11 NT09EC-405 v.1.1 EN...
- Page 12 NT09EC-405 v.1.1 EN Other languages: info@onetech-tools.com www.onetech-auto.de...
Need help?
Do you have a question about the NT09EC-405 and is the answer not in the manual?
Questions and answers