Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for OneTech NT09E-550CF
Summary of Contents for OneTech NT09E-550CF
- Page 1 ELECTRIC BRUSHLESS RANDOM ORBITAL SANDER NT09E-550CF OPERATION MANUAL...
-
Page 2: Electrical Safety
NT09E-550CF v.1.0 EN ATTENTION! PLEASE READ THIS MANUAL BEFORE OPERATING THE POWER TOOL. IMPROPER USE OF THE TOOL MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! ONLY QUALIFIED AND SPECIALLY TRAINED PERSONNEL FAMILIARIZED WITH THESE INSTRUCTIONS IS ALLOWED TO OPERATE AND PERFORM MAINTENANCE OF THE TOOL. - Page 3 NT09E-550CF v.1.0 EN If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
-
Page 4: Additional Safety Warnings
Do not use the tool if you do not understand these operating instructions or you feel the work is beyond your capability; contact ONETECH representative or a trained professional for additional information or training. Maintain labels and nameplates. These carry important information. If they are unreadable or missing, please contact a ONETECH ... -
Page 5: Features And Installation
NT09E-550CF v.1.0 EN 3. FEATURES AND INSTALLATION 3.1 Securing and Changing the Abrasive Place the abrasive in the centre of the sander backing pad and press on it. The holes in the abrasive must be aligned with the holes in the backing pad. -
Page 6: Troubleshooting
ONETECH reserves the right to modify the above terms and conditions at any time without notice, and is entitled to the final interpretation of the above warranty terms. -
Page 7: Description Of Symbols
NT09E-550CF v.1.0 EN 9. DESCRIPTION OF SYMBOLS The following are some of the abbreviations and symbols used on the rating label attached to the product. Familiarize yourself with them to reduce hazards like personal injuries and property damage. Exemption from liability The manufacturer and his representative shall not be liable for any damage or lost profit due to an interruption in business caused by a malfunctioning or unusable product. -
Page 8: Ce Declaration Of Conformity
NT09E-550CF v.1.0 EN 10. DESCRIPTION OF SYMBOLS The following are some of the abbreviations and symbols used on the rating label attached to the product. Familiarize yourself with them to reduce hazards like personal injuries and property damage. Before switching on the tool, read the operation manual! Wear eye protection. - Page 9 NT09E-550CF v.1.0 EN 12. SPARE PARTS POSITION DIAGRAM...
- Page 10 NT09E-550CF v.1.0 EN Description Part No. Q'ty Description Part No. Q'ty Screw NT09S-1570 Cover for Eccentric Orbit 5 mm NT09S-1585 O-ring NT09S-1571 Cover for Eccentric Orbit 3 mm NT09S-1586 Ball Bearing (5001) NT09S-1572 Screw (3.5x10 mm) NT09S-1587 Stator NT09S-1573 Motor Mount...
- Page 11 NT09E-550CF v.1.0 EN NOTES...
- Page 12 Other languages: info@onetech-tools.com www.onetech-auto.de...
Need help?
Do you have a question about the NT09E-550CF and is the answer not in the manual?
Questions and answers