User Instructions Dear users, To better operate your e-bike, please read the manual for Digital II display carefully before use. We will use the most concise words to inform you of all the details (including the hardware installation, setting and normal operation use of the display) when using our display.
1. Appearance and Dimension 1.1 Material and Color Digital II product shells are made of white and black PC materials. The material of the shell allows normal use at the temperature of -20℃ to 60℃ and can ensure good mechanical performance.
Fax:+0086 022 8478 0358 Tel: +0086 022 8478 2. Function and Button Definition 2.1 Function description Digital II provides you with a variety of function modes to meet your riding needs. Its functions are as follows: Battery power indication ...
KING-METER TECHNOLOGY CO., LTD No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN Fax:+0086 022 8478 0358 Tel: +0086 022 8478 3.Operation Cautions Pay attention to safety during use, and do not plug or unplug when the display is powered Try to avoid bumping or colliding with the display Do not release the waterproof sticker film attached to the display, to avoid impairing its waterproof performance.
KING-METER TECHNOLOGY CO., LTD No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN Fax:+0086 022 8478 0358 Tel: +0086 022 8478 5.2 User interface 5.3 Speed/Trip /ODO After turning it on, the display indicates real-time speed by default. Long press the 【MODE】and【UP】keys to switch the display information. Displayed in order: real-time speed (unit: Km/h) →...
KING-METER TECHNOLOGY CO., LTD No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN Fax:+0086 022 8478 0358 Tel: +0086 022 8478 5.5 Turn on/off the backlight Press and hold【UP】 >2 seconds, the backlight is turned on, and the controller will be notified to turn on the headlights. When the outside light is low or at night while riding, the LCD backlight can be turned on.
KING-METER TECHNOLOGY CO., LTD No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN Fax:+0086 022 8478 0358 Tel: +0086 022 8478 The fault can only be exited when the fault is eliminated, and the e-bike cannot continue to drive after a fault occurs. 7. User setting 7.1 Preparation before starting...
KING-METER TECHNOLOGY CO., LTD No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN Fax:+0086 022 8478 0358 Tel: +0086 022 8478 7.2.3 Speed Limit Setting The default maximum riding speed of the display is 25Km/h. Changing this value can set the maximum riding speed of the e-bike. When the e-bike exceeds the set value, the controller will stop the power supply to the motor to protect the safety driving of the rider.
KING-METER TECHNOLOGY CO., LTD No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN Fax:+0086 022 8478 0358 Tel: +0086 022 8478 7.2.5 KM Mile switch The default factory setting of this display is KM, and the metric system can be adjusted to MILE by short pressing【UP】/【DOWN】.
9.2.6. Expired warranty 10. Version This Users Guide is prepared for general-purpose software (V1.0) of Tianjin King-Meter Electronic Co., Ltd. The version of software used on some bikes may be slightly different, which should depend on the actual version in use.
Need help?
Do you have a question about the Digital II and is the answer not in the manual?
Questions and answers