Programme End; Drum Light On; Possible Causes Of Unsatisfactory Drying Results - AEG TR939M4ZC User Manual

9.11 Programme end

Clean the filter and drain the water container after each drying
cycle. (See chapter CARE AND CLEANING.)
If the drying cycle is finished, the symbol
If the Signál option is activated, the acoustic signal sounds
intermittently for 1 minute.
If you do not turn off the appliance, the anti-crease phase starts
(not active with all programmes). Flashing
execution of the anti-crease phase. Laundry can be removed
during this phase.
To remove the laundry:
1. Push the Zap./Vyp. button for 2 seconds to turn the appliance
off.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.

Possible causes of unsatisfactory drying results:

• Inadequate default dryness level settings. See chapter
Adjustment of default dryness level

9.12 Drum light on

Touch and hold down Pára button by around 3 seconds.
The light inside the drum is on.
9.13 Possible causes of unsatisfactory drying results:
• The filter is clogged. Clogged filter makes drying inefficient.
DAILY USE
appears on the display.
symbol signals the
43/72