Download Print this page

The Prosense Load Detection; Program Change - AEG TR939M4ZC User Manual

Advertisement

DAILY USE
The appliance starts and the LED above the button stops flashing
and stays on.

9.9 The ProSense load detection

The ProSense The ProSense technology detects the laundry
load size defining the programme duration.
After setting a drying programme, the
display if the programme supports it.
Touching the Start/Pauza button, the ProSense starts the laundry
load detection:
1. The appliance detects the load in the first minute: the indicator
flashes, the bars under the icon move back and forth
the drum rotates shortly.
2. When the drum stops rotating, the display shows the new
programme duration adjusted according to the detected load.
The number of bars, from 1 to 4, represents the estimated load
amount. 4 bars represent the maximum load amount for the
selected programme.
In case of drum overload, the maximum declared load indicator
comes on again with the
during these 30 seconds, it is possible to open the door and
remove the exceeding garments. Once removed, touch the
Start/Pauza button to start the programme again. If the laundry
amount will not be reduced, the programme starts anyway. In
this case, it will be not possible to guarantee the best results.

9.10 Program change

To change a program:
1. Push the Zap./Vyp. button to turn the appliance off.
2. Push the Zap./Vyp. button again to turn on the appliance.
3. Set a new program.
42/72
indicator blinking. In this case,
icon lights up on the
and

Advertisement

loading
Need help?

Need help?

Do you have a question about the TR939M4ZC and is the answer not in the manual?