Troubleshooting - AEG TR939M4ZC User Manual

TROUBLESHOOTING

Error
code
EH0
If the display shows other error codes, deactivate and activate the
appliance. If the problem continues, contact the Authorised Service
Centre.
In case of different problem with the tumble dryer check the table
below for possible solutions.
12.2 Troubleshooting
Problem
You cannot activate the appli‐
ance.
The programme does not start.
56/72
Possible cause
The mains supply is un‐
stable.
When the appliance is
showing EH0, please
wait until main supply is
stable than press start. If
the appliance pause the
cycle without any indica‐
tion then press the cycle
start. If the warning will
occur check the power
cord / socket integrity or
main supply.
Possible solution
Make sure that the mains plug
is connected to the mains sock‐
et.
Check fuse in fuse box (do‐
mestic installation).
Press Start/Pauza.
Remedy