Cooling Phase And Automatic Anti-Crease Programme; Programme End; Switching Off The Appliance; Cleaning The Fluff Filter - AEG LAVATHERM 323 Operating Instructions Manual

Hide thumbs Also See for LAVATHERM 323:
Table of Contents

Advertisement

Cooling phase and anti-crease cycle
Shortlybeforethe programmefinishesthe laundry iscoold down. If
the laundry is not removed at the end of the programme the anti-
crease cycle commences automatically. It lasts for 30 minutes and
the drum rotates intermittently. This ensures the laundry remains
loose and fluffy and does not pick up any creasing. At the end of the
anti-crease cycle the programme switches off automatically and
the laundry should really be taken from the machine at this point to
prevent creasing.
Programme end
Switching off
the appliance
Turn the programme selector to the 0 (off) position.The interior light
and the machine "on" light will go out.
Cleaning the fluff filter
Fl uff collects in the fluff filter on the inside of the loading door. (The
amount of fluff breaks down as follows according to HEA, Frankfurt,
the mainadvisorybodyforelectricalappliances: (70%duetowear,
20 % due to washing and 10 % due to tumble drying). To ensure
unimpeded airflow it is necessary to clean my fluff filter after each
drying cycle. To clean the filter lift up the coarse filter and remove
fluff from fine filter.
18
Fluff is more easily removed if you dampyour hand slightly or use a
damp cloth. After cleaning the fine filter, fold down and clip in
coarse filter.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LAVATHERM 323 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Lavatherm 320

Table of Contents