(Inserting the card
3
Orient the card as shown, and
insert it into the card slot as
shown in the illustration.
• Insert the card straight in.
• Insert the card until it clicks into place.
• Inserting the card in the wrong direction or
at an angle may damage the contacts and
prevent the card from being removed.
• The card may not record properly if it is
not inserted all the way in.
(Removing the card
3
Push the card all the way in and
release slowly.
• The card protrudes slightly and stops.
Caution
Releasing your finger quickly after
pushing the card all the way in may
cause it to eject forcefully out of the slot.
• Grasp the card and remove.
4
Close the card cover.
The internal memory and memory card
Card cover
Notch
Contact area
33
2