Changing the monitor and viewfinder display (y)
1
Take the picture.
• When recording starts, aim the camera
microphone at the source of the sound
you want to record.
TIPS
• H is displayed when still pictures with sound are played back. During
playback, sound is output from the speaker. The volume can be adjusted.
g"Setting camera sounds (8/BEEP/SHUTTER SOUND/VOLUME)"
(P. 107)
• Sound can be added later to still pictures. Recorded sound can also be re-
5
recorded. g"Adding sound to still pictures" (P. 86)
Note
• If the microphone is farther than 1 m (3.3 ft.) from the subject, sound may not
be recorded properly.
• Pictures cannot be taken during sound recording.
• Recording sound with still pictures is not available during sequential shooting,
panorama shooting, or timelapse.
• Sound recording may also pick up camera noises, such as button operations,
shutter movement, etc.
• Sound recording may not be possible if there is insufficient space in the internal
memory or the card.
Changing the monitor and viewfinder
display (DISP./GUIDE)
This function displays histograms and lines that help you to compose your
pictures. Also, you can hide the shooting information from being displayed
on the monitor.
70
Microphone