Adjusting The Brightness Of The Monitor - Olympus Stylus 1050 SW Instruction Manual

Make the settings for the functions while referring to "Using the Menu" (p. 3).

Adjusting the brightness of the monitor

[s]
x SETUP  s
To adjust the monitor brightness
1 Use 12 to adjust the brightness while
viewing the screen, and then press the
o button.
s
BACK
Setting the date and time [X]
x SETUP  X
"Setting the date and time" (p. 13)
To select the date and time display
order
1 Press 4 after setting "Minute", and use
12 to select the date display order.
X
Y
2008 11 26 12 30
Date order
CANCEL
SET OK
MENU
M D TIME
Y M D
SET
OK
MENU
Setting the date and time for another
time zone [DUALTIME]
x SETUP  DUALTIME
By setting [DUALTIME] to [ON] and setting
the date and time, the set date and time is
reflected in the image file names, date prints
and so on.
Submenu Submenu
2 3
OFF —
(Proceeds
to the
ON
setting
screen .)
*1
The setting procedure is identical to that in "Setting
*1
the date and time" (p. 13).
The date display order is the same as that
set with [X].
Application
Switches to the date and
time set in [X] (Date/
time).
Switches to the date
and time that were set in
[DUALTIME] when using
the camera in another
time zone.
EN