Interface Settings - Simpleway NNOUNCE micnode mini Hardware User's Manual

micnode mini – Hardware User Guide
IMPORTANT: Instead of 000000 enter the last 6 digits of the MAC address which you can find on you micnode
mini device.
NOTE: The device is using mDNS.
4. Your web-browser shows the login page of your micnode mini device.
5. Enter credentials into the
IMPORTANT: Default credentials are admin/simpleway. Change default password upon the first login.
Now you are able to access the configuration settings of the device and continue with interface configuration.

Interface Settings

After login into the nnounce configuration UI, establish a connection between your new micnode mini station and your
network. Configure the LAN port in the Interfaces section.
Choose between manual and auto mode setting:
•
Manual - user enters IP Address, Net Mask and default Gateway.
•
Auto - DHCP server needs to be available to obtain network settings automatically.
•
Off mode turns the port off.
IMPORTANT: You will need the device's IP address, MAC address from your device which you find on the rear panel.
NOTE: Navigate backwards or cancel your steps with the Back function in your browser.
TM
nnounce by Simpleway
nnounce configuration user
NN_USER_GUIDE_micnodeMINI_v1.1.docx
interface.
7