Stream Configuration - Simpleway NNOUNCE micnode mini Hardware User's Manual

micnode mini – Hardware User Guide
1. Click on the red rectangle below the zone button number.
2. Select from the list of available zones the one you want to assign to the specific zone paging button.
After you have selected the zone, it is visible below the zone button number.

Stream Configuration

Create an AES67 stream in the Q-SYS designer. Select first the component and then configure it in the micnode mini
plugin.
3. Add the transmitter stream component to your Q-SYS design:
4. Set up stream properties:
TM
nnounce by Simpleway
NN_USER_GUIDE_micnodeMINI_v1.1.docx
13