Oki C5550 MFP User Manual page 134

6. Remove the new fuser from its packaging and remove the
transit material.
7. Holding the new fuser by its handle, make sure that it is
the correct way round. The retaining levers (2) should be
fully upright, and the two locating lugs (3) should be
towards you.
Fuser Alone.eps
2
8. Lower the fuser into the MFP, locating the two lugs (3) into
their slots in the metal partition which separates the fuser
area from the image drums.
9. Push the two retaining levers (2) towards the rear of the
MFP to lock the fuser in place.
Fuser Lock.eps
2
3
C5550 MFP User's Guide
Maintenance > 134
2
C
M
Y
K