Oki C5550 MFP User Manual page 132

F
USER REPLACEMENT
The fuser is located inside the MFP just behind the four image
drum units.
If the MFP has recently been powered on, some fuser
components will be very hot. Handle the fuser with
extreme care, holding it only by its handle, which will
only be mildly warm to the touch. A warning label
clearly indicates the area.
Switch off the MFP and allow the fuser to cool for about
10 minutes before opening the cover.
1. Gently raise the scanner.
Scanner up.eps
WARNING!
C5550 MFP User's Guide
Maintenance > 132