Error Messages - Nikon CoolPix S8200 Reference Manual

Error Messages

Display
O (blinks)
N
Battery exhausted.
P
Battery temperature
high
P
The camera will turn
off to prevent
overheating.
Q (● blinks red)
P
Please wait for the
camera to finish
recording.
u
Memory card is write
protected.
P
This card cannot be
used.
P
This card cannot be
read.
E86
Problem
Clock not set.
Battery exhausted.
Battery temperature is
high.
Memory card or inside
of camera has become
hot.
Camera cannot focus.
Camera cannot perform
other operations until
saving is complete.
Write-protect switch is
in "lock" position.
Error accessing memory
card.
Solution
Set date and time.
Charge or replace the battery. 14, 16
Turn off camera, and allow
battery to cool down before
resuming use. After five
seconds, this message will
disappear, the monitor will
turn off, and the power-on
lamp will blink rapidly. After
the lamp blinks for three
minutes, the camera will turn
off automatically. Pressing the
power switch also turns off
the camera.
The camera turns off
automatically. Leave the
camera off until the memory
card or the inside of the
camera has cooled and then
turn it on again.
• Refocus.
• Use focus lock.
Wait until message clears
from display automatically
when saving is complete.
Slide write-protect switch to
"write" position.
• Use approved card.
• Check that terminals are
clean.
• Confirm that memory card
is correctly inserted.
A
E61
21
–
28, 29
78
–
–
19
18
18