Table of Contents
Advertisement
Error Messages
This section lists the error messages that appear in the display.
Message
(Shutter-speed or
aperture display
flashes)
Keeping the zoom ring
button pressed, rotate
the zoom ring to
extend the lens.
Check lens. Pictures
can only be taken
when a lens is
attached.
Start-up error. Turn the
camera off and then
on again.
The clock has been
reset.
No memory card.
n
This memory card is
not formatted. Format
the memory card?
Memory card is locked
(write protected).
Memory card is full.
94
If the subject is too bright, lower ISO sensitivity
or choose a faster shutter speed or smaller aper-
ture (higher f-number).
If the subject is too dark, raise ISO sensitivity, use
the flash, or choose a slower shutter speed or
larger aperture (lower f-number).
A lens with a retractable lens barrel button is
attached with the lens barrel retracted. Press the
retractable lens barrel button and rotate the
zoom ring to extend the lens.
Attach a lens.
Turn the camera off, remove and replace the
battery, and then turn the camera on.
Set the camera clock.
Turn the camera off and confirm that the card is
correctly inserted.
Select Yes to format the card, or turn the camera
off and insert another memory card.
Turn the camera off and slide the card write-pro-
tect switch to the "write" position.
• You may be able to record additional images if
you reduce image quality or size.
• Delete unwanted images.
• Insert another memory card.
Solution
Advertisement
Table of Contents
