Table of Contents
Advertisement
Error Messages
Refer to the table below if an error message is displayed.
Display
Battery temperature
is elevated. The
camera will turn off.
The camera will turn
off to prevent
overheating.
Memory card is write
protected.
This card cannot be
used.
This card cannot be
read.
Card is not formatted.
Format card?
Out of memory.
Image cannot be
saved.
Image cannot be
modified.
Cannot record
movie.
Cannot reset file
numbering.
Technical Notes
Error Messages
Downloaded from
The camera turns off automatically. Wait until the
camera or battery temperature has cooled before
resuming use.
The write-protect switch is in the "lock" position.
Slide the write-protect switch to the "write" position.
An error occurred while accessing the memory card.
Use an approved memory card.
Check that the terminals are clean.
Confirm that the memory card is correctly inserted.
The memory card has not been formatted for use in the
camera.
Formatting deletes all data saved on the memory card.
If you need to keep copies of any images, make sure to
select No and save the copies to a computer or other
medium before formatting the memory card. Select
Yes and press the k button to format the memory
card.
Delete images or insert a new memory card.
An error occurred while saving the image.
Insert a new memory card or format the memory card.
The camera has run out of file numbers.
Insert a new memory card or format the memory card.
Check that the images can be edited.
A time-out error occurred while saving the movie on
the memory card.
Select a memory card with a faster write speed.
File numbering cannot be reset because the sequential
number of a folder has reached the upper limit.
Insert a new memory card or format the memory card.
ManualsNet.com
Cause/Solution
196
search engine
A
–
16, 193
16, 223
16, 194
16, 28
16, 176
16, 176
83, 205
223
16, 176
Advertisement
Table of Contents
