Auto Off - Nikon CoolPix S8200 Reference Manual

The Setup Menu

Auto Off

d button M z tab M Auto off
If no operations are performed for a specified amount of time, the monitor turns
off and the camera enters standby mode (A 21).
Select the time allowed to elapse before the camera enters standby mode from 30 s,
1 min (default setting), 5 min, and 30 min.
C
When the Monitor Has Turned Off to Save Power
• When the camera is in standby mode, the power-on lamp blinks.
• If no operations are performed for about three minutes, the camera will turn off automatically.
• When the power-on lamp is blinking, the following operations will turn the monitor back on.
- Pressing the power switch, shutter-release button, c button, or b (e movie-record) button
- Rotating the mode dial
C
Auto Off
The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
• While menus are displayed: 3 minutes (when auto off is set to 30 s or 1 min)
• During slide show playback: Up to 30 minutes
• When the AC Adapter EH-62F is connected: 30 minutes
E72