Page 1
69 00 715 Instruction manual Leaf blower Original instructions attachment Important! Before installation and initial use, read these operating instructions and the operating instructions for the power tool carefully and observe all safety instructions. 9 129 170 english 12/2008...
Page 2
69 00 715 - ENGLISH - Leaf blower attachment Symbols Instruction manual Original instructions The following symbols are used on the tool and in these operating instructions, in addition to the symbols used on the power tool: The leaf blower attachment...
Only use accessories and spare parts (particularly for the cutters) recommended by the manufacturer. Wear sturdy shoes with a good tread - ideally safety shoes. We recommend: SOLO leather forest boots Part no: 9930510 + size (36 - 48) Always wear safety gloves when working, cleaning or maintaining the attachment..
Page 4
Preparation for work - Installation ; Aplication 2. Preparation for work – Installation 3. Application The blower may only be operated when fully Use the assembled leaf blower in accordance with assembled. the illustration. Switch off the power tool engine before fitting (and later removing) the attachment to/from the power tool.
Check the complete machine for operational safety. 4.1 Gearbox lubrication To lubricate the bevel gear drive, use SOLO "Special gearbox grease" (part no. 008318025). Check the grease level weekly and top up, if required (approx. every 20 - 50 hours).
Made in Germany SOLO SOLO Postfach 60 01 52 P.O.Box 60 01 52 D 71050 Sindelfingen D 71050 Sindelfingen Germany Tel. 07031-301-0 Phone+49-7031-301-0 Fax 07031-301-130 +49-7031-301-149 info@solo-germany.com export@solo-germany.com...
Need help?
Do you have a question about the 69 00 715 and is the answer not in the manual?
Questions and answers