Subscribe to Our Youtube Channel
Related Manuals for Solo 467
Summary of Contents for Solo 467
- Page 1 Instruction manual Leaf blower Original instructions Important! Read this instruction manual carefully before first operation and strictly observe the safety regulations! 9 467 101 06/2011...
- Page 2 Your emission control system includes parts such as the carburetor, the ignition system, and the exhaust Hint: Medical implant system. Where a warrantable condition exists, Solo will repair Type plate your small non-road power equipment engine at no cost to you including diagnosis, parts, and labor.
-
Page 3: Table Of Contents
• Damages caused by overheating due to dirt build up on the ventilator casing. • Intervention by non-specialized persons, or improper repair attempts. • The use of unsuitable replacement parts or parts other than SOLO original parts to the extent that they cause damage. -
Page 4: Important Components
Important Components 1. Important Components Fig. 1 On/Off Switch Carburetor Adjustment Screws Throttle Lever Vibration Absorbing Springs Speed Lever Quick-Release Carrying Strap Primer Carrying Strap Choke Lever Carrying Frame Air Filter Cover Pleated Elbow Tube Fuel Tank Lid Blower Tube I Starter Handle Extension Tube II Spark Plug... -
Page 5: Safety Regulations
Safety regulations 2. Safety regulations 2.1 Correct use / General safety instructions Always observe all safety hints while using the machine. The blower unit is suitable for the removal of leaves, grass, paper, dust or snow in areas such as gardens or parks, sports facilities, parking areas or drives. -
Page 6: Assembly
• Insert extension tube 2 in blower tube 1 and secure with twist lock • Push curved nozzle tube on extension tube and also secure with twist lock 4. Accessories Conversion Kit from Blower to Mist Blower SOLO Part no.: 49 00 567 ENGLISH 6... -
Page 7: Fuelling
(minimum octane number 92 RON). When using a particularly high quality proprietary 2-stroke engine oil such as the “SOLO Profi 2T- Motoröl” which we supply, we recommend an oil:petrol mixing ratio of 1:50 (2%). When using other brands of 2-stroke oil we recommend a mixing ratio of 1:25 (4%). -
Page 8: Starting / Stopping The Engine
Starting / Stopping the engine When the engine runs, use the throttle lever (2) 6. Starting / Stopping the engine to accelerate to the required engine speed. For continuous use, set the throttle lock lever (3) in the required position for the desired engine speed. -
Page 9: Operating Hints
Operating Hints 7. Operating Hints Prior to operating and prior to each start, check the blower unit's condition with regard to throttle activation, on/off switch, protective covers, carrying straps and also for any fuel leaks. Take care not to inhale exhaust fumes. Do not operate the blower in closed areas. -
Page 10: Maintenance And Care
Thus SOLO recommends that you speed given in the specification can be adjusted as have a specialized SOLO workshop carry out all follows, via the idling end-stop screw "T" (the use work that is not described in these operating of a rev counter is recommended): instructions. -
Page 11: Air Filter Maintenance
Maintenance and care 8.2 Air Filter Maintenance system. This procedure would cause engine damages due overload of the engine. Warranty claims cannot be accepted for damaged engine parts caused by improper care and The air filter separates and retains dirt before the maintenance. -
Page 12: Scheduled Maintenance
Dependable operation and the safety of your device also depend on the quality of the replacement parts that you use. Use only original SOLO replacement parts. Only original parts come from the production of the device and thus guarantee the highest possible material quality, dimensional accuracy, function, and safety. -
Page 13: Parts Subject To Tear And Wear
• All rubber parts which come into contact with fuel • Spark plug • Starter 9. Technical Specifications Leaf blower Engine type SOLO single cylinder two-stroke engine Engine capacity 66,5 Bore / stroke 46 / 40 Max Engine power (ISO 8893) kW at rpm 2.1 / 5750... - Page 14 Made in Germany SOLO SOLO Postfach 60 01 52 P.O.Box 60 01 52 D 71050 Sindelfingen D 71050 Sindelfingen Germany Tel. 07031-301-0 Phone+49-7031-301-0 Fax 07031-301-130 +49-7031-301-149 info@solo-germany.com export@solo-germany.com...
Need help?
Do you have a question about the 467 and is the answer not in the manual?
Questions and answers