General Operation; Brake Operation; Electric Operation - Decathlon E-ACTV900 Instructions For Use Manual

GENERAL OPERATION

BRAKE OPERATION:

The front brake is controlled by the left brake lever (or by the right brake lever in certain countries such as India, China, United Kingdom, etc.). The rear brake is controlled
using the right-hand lever (or left in the countries listed above). Before using the bicycle, check which levers operate the front and rear brake. The brake lever must not come
into contact with the handlebar. If it does, adjustment is required.
SUSPENSION:
The fork is equipped with suspensions to limit the feeling of shocks due to the terrain. The fork is not adjustable.
OPERATION OF CLIPLESS PEDALS (NOT SUPPLIED WITH THIS BIKE):
Clipless pedals and toe-clips can be tricky to use and may take some time to get used to in order to avoid falls: engage and disengage your shoes in the pedals before setting
off. The interface between cleat and pedal can be affected by a number of factors including dust, mud, lubrication, spring tension and general wear. To adjust shoe bindings,
refer to the component manufacturer's recommendations and call on the help of a qualified mechanic.

ELECTRIC OPERATION

CONTROLS :
General controls
The E-ACTIV900 is sold with a display which has a TFT colour screen and a remote. This screen will tell you information relating to your session (speed, distance, time,
etc.) and your electric bike (battery level, remaining battery life, level of electric assistance, etc.).
1
Short press: Increase assistance mode / Increase cadence
Short press: Decrease assistance mode / Decrease cadence
2
Long press: Bluetooth pairing
Short press: Cadence settings
3
4
Long press: ON/OFF
1
4
2
6
3
8
Short press: Light ON/OFF
5
Long press: Settings menu
Short press: Switch values / Decrease values in settings
6
Short press: Switch values / Increase values in settings
7
Short press: Reset / Validate
8
9
5
7