NEC MultiSync 20WMGX2 User Manual page 24

Operating Instructions
Parental Controls (TV, VIDEO input only)
Parents can block certain types of programming based on the content rating.
To access the parental lock menu for TV programs press the "CH LOCK" button on your remote
control while in TV mode. Using the numeric pad on your remote control, you must now enter
your password. If you enter an incorrect password, you must press "exit" and start over by
pressing "CH LOCK" on your remote control. The factory preset password is 1111.
When the correct password is entered, you will be taken to a menu for the different TV ratings.
Use the direction buttons on your remote control to choose the minimum rating and press the
center select button on the remote control. After choosing a TV rating you will be prompted to
"ALLOW" or "BLOCK" a sub category of ratings. By moving up or down on this menu you can
choose "ALLOW" or "BLOCK" for each category. When you are finished making your selec-
tions, you can choose "EXIT" on your remote control to return to normal viewing.
To change your password, select "PASSWORD" from the secondary menu in the TV ratings sec-
tion. This will prompt you to enter a new password. Enter a four (4) digit numeric password.
You will be prompted a second time to enter the new password for verification. If the new pass-
word is entered successfully a second time you will see a message that your password is success-
fully changed.
To access the parental lock menu for VIDEO (DVD) programs press the "CH LOCK" button on
your remote control while in Video 1 mode.
When the correct password is entered, you will be taken to a menu for the different VIDEO rat-
ings. Use the direction buttons on your remote control to choose the minimum rating and press
the center select button on the remote control.
When you are finished making your selection, you can choose "EXIT" on your remote control to
return to normal viewing.
continued
Note: Availability of OSM controls depends on the type of input signal displayed.