NEC MultiSync 20WMGX2 User Manual page 23

Operating Instructions
CHANNEL SETTING:
SYSTEM: Select TV connection type (AIR/STD/HRC/IRC).
AUTO SEARCH: Automatically stores available channels in TV mode.
MANUAL CHANNEL EDIT: Manually add or remove channels from TV mode.
INFORMATION
The Information menu provides information about the current input source as indicated in the table below,
as well as the model name, serial number and the URL.
Input Type
PC1, PC2
TV
Video1
Video2
OSM Warning: OSM Warning menus disappear with Exit button.
®
NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or
when there is a change of input signal or video is inactive, the No Signal window will appear.
RESOLUTION NOTIFIER: This function gives a warning if a resolution other than the optimal resolution is used.
After power is turned on or when there is a change of input signal or the video signal doesn't have proper
resolution, the Resolution Notifier window will open. This function can be disabled in the Menu Tools.
OUT OF RANGE: This function gives a warning if the signal being used is not within the optimized resolution
and refresh rate. After the power is turned on or there is a change of input signal or the video signal doesn't
have the proper timing, then the Out Of Range window will appear.
Information Provided
Resolution, Horizontal and Vertical frequencies, Polarity of the input signal
Channel number, signal format
Signal format
Resolution
continued