F&F BIS-408 Quick Start Manual page 2

Mounting
1. Disconnect the power supply.
2. Mount relay in the flush-mounted box.
3. Connect the power supply cables to PWR group: phase L-wire
to terminal 5 or 6 and neutral N-wire to terminal 3 or 4.
4. Momentary switches connected in parallel connect to terminal
1 and phase L-wire.
5. Connect the powered receiver in series to terminal 2 and neu-
tral N-wire.
Wiring diagram
1 control input
2 relay output
3/4 N power supply
5/6 L power supply
- 2 -