Download Print this page

F&F BIS-403 Quick Start Manual

Bistable relay with timer

Advertisement

Quick Links

BIS-403
Bistable relay
with timer
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Purpose
Electronic bistable pulse relay BIS-403 allows switching on or
off the lighting or other device for a preset period of time or
permanently.
The device is controlled by one or several monostable (bell) swi-
tches connected in parallel.
Functioning
Briefly pressing the button closes the contact (switching on the
connected receiver). The contact will be opened (switching off
the controlled receiver) after the preset time "t"
or by pressing the button again
A long press of the button, lasting at least 2 seconds, switches
the contact permanently on
The contact will not open until the button is pressed again (or
after a power failure).
F&F Filipowski L.P.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
.
.
- 1 -
has elapsed,

Advertisement

loading
Need help?

Need help?

Do you have a question about the BIS-403 and is the answer not in the manual?

Questions and answers

Summary of Contents for F&F BIS-403

  • Page 1 Electro thrown in the trash or abandoned in nature, pose a threat to the environment and human health. Purpose Electronic bistable pulse relay BIS-403 allows switching on or off the lighting or other device for a preset period of time or permanently.
  • Page 2 power supply voltage control signal (button press) relay activation time relay output (NO contact) Mounting 1. Disconnect the power supply. 2. Mount relay in the flush-mounted box. 3. Connect the power supply to the relay as indicated: phase L to the brown wire;...
  • Page 3: Wiring Diagram

    Wiring diagram receiver L power supply control input N power supply BIS-403 is not compatible with backlit buttons. - 3 -...
  • Page 4: Power Table

    Technical data power supply 195÷253 V AC contact 1×NO maximum load current (AC-1) 10 A control pulse current 1 mA triggered L or N level activation delay 0.1÷0.2 s adjustment time 1÷12 min. power consumption 0.8 W terminal 4×DY 1 mm², l= 10 cm working temperature -25÷50°C dimensions...
  • Page 5: Warranty

    Warranty The F&F products are covered by a warranty of the 24 months from the date of purchase. Effective only with proof of purchase. Contact your dealer or directly with us. CE declaration F&F Filipowski L.P. declares that the device is in conformity with the essential requirements of The Low Voltage Directive (LVD) 2014/35/EU and the Electromagnetic Compatibility (EMC) Directive 2014/30/UE.