T-Rex Z315821 Installation Manual

PARTS INCLUDED
- (1) ZROADZ Main Grille - Part # Z315821
- (1) Grille Top Mounting Bracket
- (1) Grille Bottom Mounting Bracket
- (1) ZROADZ 20" Single Row LED Light Bar
- (1) Wiring Harness
- (1) Hardware Pack
HARDWARE INCLUDED
(3) - Grille Retainer Clips
TOOLS REQUIRED
- Prying Tool
- Various Socket Set
- Various Wrenches
- Ratchet Tool
- Ratchet Extensions
PAGE 1
ZROADZ SERIES GRILLE
All Rights Reserved - Copyright ©2020 -T-REX TRUCK Products, inc.
BEFORE YOU BEGIN
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION.
Auto makers offer varied models to each vehicle and occasionally manufacture
more than one body style of the same model. To assure your part is correct; our tech
department can be contacted at tech@trexbillet.com to verify fitment and assist with
technical questions. All other inquires can be directed to info@trexbillet.com. In the
event you do not have internet access please call 1-800-287-5900.
* APPLICATION MODELS VARY. WE RECOMMEND TO VERIFY FITMENT BEFORE BEGINNING INSTALLATION PROCESS.
* IMAGES FEATURED IN THE INSTRUCTION DOCUMENTS MAY NOT ALWAYS EXACTLY MATCH YOUR MODEL OR PART.
START HERE
Turn off engine, chalk tires with stop block, open the hood and disconnect the battery.
FIG 1
STEP 2
2) The OEM Factory
Grille will have to be
removed.
Before you begin,
apply a protective
layer of low adhesive
"painters tape" such
as 3M Safe Release
or Scotch Blue
on the vehicle around
the grille and work area
to protect the paint &
FIG 2
finish.
MAIN GRILLE - # Z315821
2020 FORD RANGER
INSTALLATION GUIDE
LED Light bAR installation
STEP 1
1) Open and unbox the
T-REX package. Sort out all
components and hardware
pack.
The ZROADZ Series Grille may
not have the LED Light Bar
installed to the new Grille.
Do that now with the
supplimental ZROADZ Insert.
SEE FIGURE 2