Scanner Model; Current Scanner Info; Scanner Probe - Microtek ArtixScan 4500t Reference Manual

Scanner Model

The top of the scanner menu displays the scanner model you are using and its
SCSI ID or USB ID number. If you have multiple scanners on your system, all the
scanners are shown with their respective SCSI or USB IDs, and the current
scanner is indicated by a check.
Only one scanner can be accessed at a time. To switch among various scanners,
select the scanner to be used.

Current Scanner Info

This command provides information about your current scanner. When you
choose this command, a dialog box appears showing the scanner model, the
SCSI or USB ID number, and the firmware version.

Scanner Probe

This command shows the scanner information on your SCSI / USB chain. If your
scanner does not show in the dialog box, make sure your scanner is connected
and turned on, and then click the Probe button. Please follow the scanner
hardware installation guide for proper procedures on connecting your scanner.
SCSI /USB devices
12 Microtek ScanWizard Pro for Macintosh
The scanner with its SCSI or USB ID
number is displayed. The current
scanner is marked by a check.
Click the Probe
button to update
scanner
information on the
SCSI / USB chain