The Scanner Menu; Scanner Model; Get Current Scanner Info - Microtek ScanWizard Medi Reference Manual

The Scanner Menu

The Scanner Menu lets you:
• Show your scanner model or select a scanner if you have multiple scanners
• Get information about current scanner
• Get scanner information on the SCSI/USB/FireWire chain
• Set idle time for saving power

Scanner Model

The scanner model (and its SCSI, USB, or FireWire ID number) is shown at the
top of the scanner. If you have multiple scanners on your system, all the
scanners are shown with their respective IDs, and the current scanner is
indicated by a check.
Only one scanner can be accessed at a time. To switch among various scanners,
select the scanner to be used.

Get Current Scanner Info

This command provides information about your current
scanner. When you choose this command, a dialog box
appears showing the scanner model, Scanner ID
number, and firmware version.
When you are working on some specific scanners (e.g.,
Medi-7000, Medi-6000 Plus), the dialog box will be
shown as below, where you can get the roller scan times
information.
Microtek ScanWizard Medi Reference Manual 19