The Scanner Menu; Scanner Model; Get Current Scanner Info - Microtek ScanWizard Bio Reference Manual

The Scanner Menu

The Scanner Menu lets you:
• Show your scanner model or select a scanner if you have multiple scanners
• Get information about current scanner
• Get scanner information on the SCSI/USB/FireWire chain
• Set idle time for saving power

Scanner Model

The scanner model (and its SCSI, USB, or FireWire ID number) is shown at the
top of the scanner. If you have multiple scanners on your system, all the
scanners are shown with their respective IDs, and the current scanner is
indicated by a check.
Only one scanner can be accessed at a time. To switch among various scanners,
select the scanner to be used.

Get Current Scanner Info

This command provides information about your
current scanner. When you choose this
command, a dialog box appears showing the
scanner model, Scanner ID number, and firmware
version.
This information shows you how many scans have been passed through the
roller, which helps out to accumulate the replacement point for the roller. The
recommended replacement point is when the numbers on two sides of the slash
symbol are equal. Press the Reset button to start recounting the scans for the
roller after replacing a new one.
Microtek ScanWizard Bio Reference Manual 15