The Scanner Menu; Scanner Model - Microtek ScanWizard Industry Reference Manual

The Scanner Menu

The Scanner Menu lets you:
• Show your scanner model or select a scanner if you have multiple scanners
• Get information about your scanner
• Get scanner information on the USB / FireWire chain
• Perform special scanner controls unique to the scanner (e.g. set idle time for
• Save the calibration time
• Get a scan count

Scanner Model

The scanner model (and its USB or FireWire ID number) is shown at the top of
the scanner. If you have multiple scanners on your system, all the scanners are
shown with their respective IDs, and the current scanner is indicated by a check.
Only one scanner can be accessed at a time. To switch among various scanners,
select the scanner to be used.
18 ScanWizard Industry Reference Manual
saving power)
The scanner is displayed with
its USB or FireWire ID number.
The current scanner is
marked by a check.