To Close A Tag Window; Choosing The White & Black Points Of An Image - Microtek ArtixScan 4500t Reference Manual

To close a tag window

Click the Close box on the upper left corner of the Tag window. To close all Tag
windows, holding down the Option key, then click the Close box of any tag
window.
Choosing the White & Black Points of an image
There are two ways to choose the white and black points of an image:
A. By using the Tag Windows tool in the Toolbar.
B. By using the Magic Diamonds. See the next section for details.
48 Microtek ScanWizard Pro for Macintosh
1) To choose the highlight (white) point in an image, click on the Tag
Windows tool in the Toolbar, press the Apple Command key, and click
on a white point in the image.
2) To choose the shadow (black) point in an image, click on the Tag
Windows tool in the Toolbar, press the Option key, and click on a black
point in the image.