Launching Scanwizard Pro; Exiting Scanwizard Pro - Microtek ArtixScan 4500t Reference Manual

Launching ScanWizard Pro

To start ScanWizard Pro, launch your image-editing program, then choose the
corresponding Import or Acquire command from the submenu (depending on
your software) for acquiring ScanWizard Pro. You may also launch the
ScanWizard Pro Applet, a mini application found in ScanWizard Pro CD that
brings up the ScanWizard Pro Plug-in.
The first time you launch ScanWizard Pro, you will be prompted to set up color
matching for your scanner. If you are not sure about what to do, simply click the
OK button to accept the settings. You can always change the settings at a later
time. For more information, see the Color Matching Setup section of the manual.

Exiting ScanWizard Pro

To exit ScanWizard Pro, go to the File menu and choose the Quit command, or
press the Apple command Š+ Q keys simultaneously.
Reference: The Preview window 3