Installation Requirements; Tools And Parts; Options - Maytag Epic MHWZ600T Use And Care Manual

Tools and Parts

Gather the required tools and parts before starting installation. The parts supplied are in the
washer drum.
Tools needed for connecting the water inlet hoses
Pliers (that open to 1 / " [39.5 mm])
9
16
Tools needed for connecting the drain hose
Locking pliers (that open to 1 9 / " [39.5 mm])
16
Tools needed for installation
Open end wrenches
14 mm and 13 mm
Level
Parts supplied
A
D E
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
D. Transport bolt hole plug (4)
Alternate Parts
Your installation may require additional parts. If you are interested in purchasing one of the
items listed here, call the toll-free number on the cover or in the "Assistance or Service"
section.
If You Have You Will Need to Buy
Laundry tub or standpipe Sump pump system (if not already available)
taller than 96" (2.4 m)
Overhead sewer Standard 20 gal. (76 L), 30" (762 mm) tall drain tub or
utility sink and sump pump (available from local plumbing
suppliers)
Floor drain Siphon break, Part Number 285834; additional drain hose,
Part Number 8318155; and connector kit, Part
Number 285835

INSTALLATION REQUIREMENTS

Flashlight (optional)
Wood block
Ruler or measuring tape
B
C
F
G
E. Beaded strap
F. Drain hose
G. Hose clamp
If You Have You Will Need to Buy
Drain hose too short 4 ft (1.2 m) drain hose extension kit, Part Number 285863
Water faucets beyond reach 2 longer water fill hoses:
of fill hoses 6 ft (1.8 m) Part Number 76314
10 ft (3.0 m) Part Number 350008
Pedestal
You have the option of purchasing pedestals of different heights separately for this washer. You
may select a 10" (254 mm) or a 15.5" (394 mm) pedestal. The pedestal will add to the total
height of the washer.
Optional pedestal
Pedestal Height Approximate height
with washer
10" (254 mm) 46" (1168 mm)
10" (254 mm) 46" (1168 mm)
10" (254 mm) 46" (1168 mm)
15.5" (394 mm) 51.5" (1308 mm)
15.5" (394 mm) 51.5" (1308 mm)
15.5" (394 mm) 51.5" (1308 mm)
Stack Kit
Are you planning to stack your washer and dryer? To do so, you will need to purchase a
Stack Kit.
To order, call the dealer from whom you purchased your washer or refer to the "Assistance or
Service" section. Ask for Part Number 8572546.

Options

Color Model Number
White MHP1000SQ0
Black MHP1000SB0
Cranberry XHP1000WR
White MHP1500SQ0
Black MHP1500SB0
Blue MHP1500SK0
5