MSI MS-9266 User Manual page 69

MS-9266 1U Rackmount Server
Clear all DMI event logs
Setting this to Yes will clear the DMI event log after rebooting. Options: [Yes],
[No].
Event Logging
Select [Enabled] to allow logging of DMI events. Options: [Enabled], [Disabled].
Clear error logs
Press the item to clear error logs.
IPMI
Press PgUp/<+> or PgDn/<-> to IPMI. The following submenu will appear.
IPM I Specification Version
It shows the support version of IPMI specification. (read only)
BM C Firmware Version
It shows the current BMC firmware version. (read only)
COM port on BMC
Select this line to enable/disable COM port on BMC. Options: [Disabled], [IPMI],
[CLI].
Change COM port Setting
Select this line to change COM port setting. Options: [Yes], [No].
Existing Event Log number/Remaining Event Log number
It shows the number of existing/remaining event log.
SYS Firmware Progress
Enabling this selection will log POST Progress. Options: [Enabled], [Disabled].
BIOS POST Watchdog
Enabling this selection will enable POST watchdog. Options: [Enabled], [Disabled].
4-14