Table of Contents
Advertisement
BIOS Setup
HDD Post Write Buffer
This setting is used to increase the performance of the HDD. The settings are:
[Disabled], [Enabled].
Large Disk Access M ode
Select DOS if you have DOS. Select Other if you have another operating system such
as UNIX. A large disk is one that has more than 1024 cylinders, more than 16 heads,
or more than 63 tracks per sector. Options: [DOS], [Other].
Quick Boot M ode
Setting the item to [Enabled] allows the system to boot within 5 seconds since it will
skip some check items. Available options: [Enabled], [Disabled].
USB BIOS Legacy Support
Set to [Enabled] if you need to use any USB 1.1/2.0 device in the operating system
that does not support or have any USB 1.1/2.0 driver installed, such as DOS. Set to
[Disabled] only if you want to use any USB device other than the USB mouse. Setting
options: [Disabled], [Enabled].
Extended M emory Testing
This setting is used to test extended memory during bootup.
Boot Summary Screen
Selecting Enabled displays system summary screen during boot up. Options: [Enabled],
[Disabled].
Sy stem M emory
It displays amount of conventional memory detected during boot up.
Select Item
-/+ Change Values
F9 Setup Defaults
Extended M emory
Select Menu
Enter Select Sub-Menu F10 Save and Exit
8
It displays the amount of extended memory detected during boot up.
4-7
Advertisement
Table of Contents
