MSI MS-9266 User Manual page 66

PCI Configuration
Press PgUp/<+> or PgDn/<-> to PCI Configuration. The following submenu will appear:
Planar PXE/DHCP Priority
Use this feature to select whether to set the planar Ethernet PXE/DHCP option
ROM as the highest priority option ROM after Video. This causes the PXE/
DHCP option ROM to execute before the PCI Device Boot Priority is checked
POST.
PCI Device Boot Priority
Use this item to select which PCI device should have boot priority. Selecting a
device which does not contain a valid boot device could cause the system
not bootable.
PCI Device, Slot #1/Slot #2/ Onboard SATA
The sub-menu is used to configure the specific PCI device. Press PgUp/<+> or
PgDn/<-> to PCI Device, Slot#1 or 2. The following submenu will appear:
Option ROM Scan
Use this feature to initialize device expansion ROM.
Enable Master
Use this feature to enable selected device as a PCI bus master.
Latency Timer
Use this feature to minimize guaranteed time slice allotted for bus master in units
of PCI bus clocks.
I/O Device Configuration
The sub-menu is used to configure I/O Devices for optimal system performance.
BIOS Setup
4-11