MSI MS-9238 User Manual page 71

After Power Failure
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Stay Off]
[Power On]
[Last State]
Resume On M odem Ring
The item specifies how the system will be awakened from power saving mode when
input signal of the Modem Ring is detected.
Resume On Time
Select [On] to wake up the system at predetermined time.
Resume Time
The time format is <HH> <MM> <SS>.
Returns the system to an off state.
Returns the system to a full on state.
Restores the system to the previous status before power
failure or interrupt occurred.
BIOS Setup
3-21