MSI MS-9238 User Manual page 41

Memory
1. Locate the DIMM slots on the mainboard. Insert the memory module vertically into
the DIMM slot. Then push it in until the golden finger on the memory module is
deeply inserted in the DIMM slot. The plastic clip at each side of the DIMM slot will
automatically close.
2. Follow the same procedures to install more memory modules if necessary.
3. Replace the fan duct on top of the
heatsinks and the memory DIMMs.
Note: To ensure proper cooling,
make sure the heatsinks & the fan
duct are properly installed.
Hardware Setup
2-23