M S-9238 Server
Dynamic or Static IP Config
This setting is used to configure your dynamic (temporary) or static (permanent)
network IP.
IP Address, IP Subnet Mask, Default Gateway
Use these settings to set up the IP address, IP subnet mask, and default gate-
way for your system network.
Legacy USB Support
Set to [Enabled] if you need to use any USB 1.1/2.0 device in the operating system
that does not support or have any USB 1.1/2.0 driver installed, such as DOS and SCO
Unix. Set to [Disabled] only if you want to use any USB device other than the USB
mouse.
3-18