MSI MS-9249 User Manual page 56

MS-9249 1U Rackmount Server
version supported by your operating system. To find out which version to use,
consult the vendor of your operating system. Settings: 1.4, 1.1.
Console Redirection
Console Redirection operates in host systems that do not have a monitor and
keyboard attached. This setting enables/disables the operation of console
redirection. When set to Enabled, BIOS redirects and sends all contents that
should be displayed on the screen to the serial COM port for display on the
terminal screen. Besides, all data received from the serial port is interpreted as
keystrokes from a local keyboard. Setting options: Enabled, Disabled.
Baud Rate
This setting specifies the transfer rate (bits per second) of Console Redirection.
Setting options: 9600, 19200, 38400, 57600, 115200.
Agent Connect via
To operate the system's console redirection, you need a terminal supporting
ANSI terminal protocol and a RS-232 null modem cable connected between the
host system and terminal(s). This field is a read-only field, which is used to
indicate the type of device connected between the host system and terminal
(s). NULL stands for a null modem.
Agent wait time (min)
This setting controls the timeout for terminals' (console redirection) connec-
tion to the host system. Setting options: 1, 2, 4, 8 (Min).
Agent after boot
This setting determines whether or not to keep terminals' console redirection
running after the OS has booted. Setting options: Disabled, Enabled.
DMI Event Log
This setting disables or enables the BIOS to log DMI (Desktop Management
Interface) events. Setting options: Enabled, Disabled.
Clear All DMI Event Log
When this setting is set to Yes, the DMI event log will be cleared at next
POST stage. Then, the BIOS will automatically set this option to No.
Setting options: Yes, No.
3-12