MS-9249 1U Rackmount Server
SATA Connectors Supported by ICH-HR: SATA1 & SATA2
The ICH-HR chipset supports two serial IDE connectors (SATA1 &
SATA2).
SATA connectors are dual high-speed Serial ATA interface ports. Each
st
supports 1
generation serial ATA data rates of 150 MB/s. All connectors are
fully compliant with Serial ATA 1.0 specifications. Each Serial ATA connector
can connect to 1 hard disk device.
SATA1/2
Optional Serial ATA cable
MSI Reminds You...
Please do not fold the Serial ATA cable into 90-degree angle.
Otherwise, the loss of data may occur during transmission.
2-8
7
PIN
SIGNAL
1
GND
1
3
TXN
5
RXN
7
GND
SATA Pin Definitions
PIN
SIGNAL
2
TXP
4
GND
6
RXP
Take out the dust cover and
connect to the hard disk devices
Connect to SATA1/2