Firmware Update - Mooer OCEAN MACHINE II Owner's Manual

From time to time, MOOER will release new firmware updates for your Ocean Machine II which will
include new features or bug fixes based on user feedback. The current firmware version of the OMII
is shown in the Reset screen. (See Reset in the Settings menu)
Note: A firmware update will reset all settings and stored presets to factory settings!
You will need a USB Type C to USB Type A cable to complete the firmware update.
1. Download the latest update-software for the Ocean Machine II from the Download Center on the
official MOOER Website (
and install the application on your computer.
2. Use the USB-C to USB-A cable to connect your computer to the USB port on your OMII.
3. Disconnect the power supply on your OMII.
Press and hold the Menu control knob while you re-connect the power supply. The blue LED in
the Preset button will blink quickly to indicate that the pedal is in Firmware Update Mode.
4. Open the software on your computer and click Start. The update progress will be shown in a
progress bar. (If the pedal is not in Update Mode, the software will show a connection error.)
5. After a successful update, the pedal will switch to Play Mode and is ready for use again.
Caution: Do not disconnect the USB cable or the power supply on your pedal while an update is in
progress. This could cause unexpected errors.

FIRMWARE UPDATE

https://www.mooeraudio.com/Downloads.html )
22