Operation - Mooer OCEAN MACHINE II Owner's Manual

Plug your guitar into the INPUT of the OceanMachine II and use audio cables to connect to your
amplifier. (See section SETUP). Connect the power adapter (9 VDC, 500 mA, center negative) to the
DC IN jack.
The main interface shows arrow graphics to indicate input and output levels. The color of the arrows
indicates the signal status:

dark arrow: no signal or signal too week

green: signal of moderate strength

yellow: signal strength close to the critical value

red: signal distortion
A red indication should be avoided during operation. Green or yellow indications are okay.
1. left input level
2. right input level
3. left output level
4. right output level
The labeling of the footswitches to the functions they perform in different modes of operation:
Play mode:
Patch (Preset) mode:
Tap tempo mode:

OPERATION

8